Rhodium SpinTech CatalogBack to main siteBrochure Library
← Back to catalog
Intelligent Ultra Water Purifier
LABPEAKWater Purification

Intelligent Ultra Water Purifier

This page covers multiple model variants. Specs below are attributed per model where confirmed — confirm your exact configuration before ordering.

Intelligent Ultra Water Purifier is equipped with an intelligent control system and can be operated via a touchscreen interface. It is primarily used in laboratories with extremely high water quality requirements. Its applications include atomic absorption/emission spectroscopy, mass spectrometry, t

Specifications

Model
WPL-PU10H; WPL-PU15H; WPL-PU20H; WPL-PU30H; WPL-PU45H; WPL-PU60H
Flow Rate
1.5–2 L/min (with pressure barrel)
Feed Water Request
Tap water: conductivity < 400 μs, 5–45 ℃, 0.02–0.25 MPa, pH 3–10
Water Production Capacity (L/H)
10, 15, 20, 30, 45, 60

Full specification sheet

  • Model [WPL-PU10H]: WPL-PU10H
  • Model [WPL-PU15H]: WPL-PU15H
  • Model [WPL-PU20H]: WPL-PU20H
  • Model [WPL-PU30H]: WPL-PU30H
  • Model [WPL-PU45H]: WPL-PU45H
  • Model [WPL-PU60H]: WPL-PU60H
  • Water Production Capacity (L/H) [WPL-PU10H]: 10
  • Water Production Capacity (L/H) [WPL-PU15H]: 15
  • Water Production Capacity (L/H) [WPL-PU20H]: 20
  • Water Production Capacity (L/H) [WPL-PU30H]: 30
  • Water Production Capacity (L/H) [WPL-PU45H]: 45
  • Water Production Capacity (L/H) [WPL-PU60H]: 60
  • Feed Water Request: Tap water: conductivity < 400 μs, 5–45 ℃, 0.02–0.25 Mpa, pH 3–10
  • Flow Rate: 1.5–2 L/min (with pressure barrel)
  • Flow Rate: RO Water Parameter
  • TDS: RO water TDS (total solid solubility, ppm) ≤ influent TDS×1% (desalination rate ≥ 99%)
  • Soluble Organic Matter Retention Rate: >99%(MW>300 Dalton)
  • Ion Rejection Rate: >99% (when using a new RO membrane)
  • Organic Matter Rejection Rate: >99%, when MW>200 Dalton
  • Inorganic ion Rejection Rate: 98–99% (when using a new RO membrane)
  • Particles and Bacterial Rejection: >99%, when MW>200 Dalton
  • Particles and Bacterial Rejection: UP Water Parameter (ASTM Type I Grade Water)
  • Conductivity: 0.055 μs/cm @ 25℃ (< 0.1 μs/cm)
  • Resistivity: >18.25MΩ.cm (25℃)
  • Heavy Metal Ion: <0.01 ppb
  • Total Organic Carbon (TOC): <5 ppb
  • Bacteria: <0.1 CFU/mL
  • Particulate Matter (> 0.1 microns): <1/mL
  • Pyrogen (endotoxin): N/A
  • DNases: N/A
  • RNases: N/A
  • RNases: Other Parameter
  • Maximum Water Production of Reverse Osmosis: 2.0 liters per minute (open pressure tank)
  • Work Stress Monitoring: 0–1 Mpa, 0–150 PSI
  • Digital Water Quality Monitoring: Online monitoring of resistivity, conductivity, and water temperature
  • Power Supply: 100–240 V, 50–60 Hz, 120 W
  • External Size (W×D×H): 420×595×550 mm
  • Shipping Size (W×D×H): 655×540×690 mm
  • N.W./G.W.: 25/40 kg
View original source listing